The SmartLF SC 36 mfp scanner with SmartWorks TOUCH MFP software is a Professional MFP Solution providing a wide format copier capable of handling a variety of color and monochrome documents up to E-size or A0 size.

The 36 inch Professional MFP Solution is capable of copying and scanning large CAD technical drawings or color office documents of the type used in architecture, engineering & manufacturing, construction, utilities, energy companies, mapping and GIS organisations.  Every Professional MFP Solution comes complete with an adjustable high stand that allows the scanner to be positioned above most large format printers.

With front-feed and front-retrieve document load and capable of taking any media up to 36 inches (914mm) wide the Professional MFP Solution has all the productive capabilities required by most offices.  A minimal footprint allows this system to be placed against a wall to minimise floor space if desired and for a busy CAD drawing office or architects practice where space can be limited the Professional MFP Solution is the perfect answer.

 

Get a Quote

Downloadable Documents

Get a quote

×
  • Ready for Epson
  • Ready for HP
  • Ready for Canon

36 inch Professional MFP Solution

  • Technical & CAD drawings
  • Architecture, Engineering & Construction drawings
  • Graphic Design
  • Copy Shops
  • Utilities & Energy Management
  • Facilities Management
  • Electronic Document Capture (EDC)
Scanner Product SmartLF SC 36 mfp
Maximum Scanning Speed @ 200dpi
Monochrome:
24bit RGB Color:
13.00 inches/sec
3.00 inches/sec
SingleSensor Scanning Technology With 43,200 pixels giving 48-bit color and 16-bit greyscale data capture
Scanning Resolutions (optical) 100, 200, 300, 400, 600 and 1200 dpi
Maximum Image Width 36 inches (914 mm)
Maximum Document Width 38 inches (965 mm)
Maximum Media Thickness 2 0.08 inches (2.0 mm) flexible media
Interface SuperSpeed USB 3.0 with up to 75MB/sec transfer rate
Included Software SmartWorks TOUCH MFP
Notes: Thick documents up to 2mm must be flexible. Colortrac does not guarantee quoted speeds for thick media. Thick media should be scanned at reduced speeds to obtain optimal image quality. For heavy and/or thick materials the operator may need to support the document as it enters and exits the scanner. For larger sizes of heavy and/or thick media Colortrac recommend the scanner be placed first on a flat surface and the operator supports the document as it enters and exits the scanner.  Colortrac recommends the Paper Return Guide be removed when using heavy and/or thick media in the scanner.

SmartWorks TOUCH is designed for Xpress and SG scanners and is not compatible with SC mfp scanners.
.

Product Colortrac SmartLF Repro Stand
Adjustable through 4 height variations allowing for maximum printer heights of:- Height 1:                   45 inches     (1143 mm)
Height 2:                   43 inches     (1093 mm)
Height 3:                   40.8 inches  (1038 mm)
Height 4:                   39 inches     (988 mm)
Adjustable Monitor Arm – screen fastening Height from Floor:      55 inches     (1396 mm)
Maximum Scanner + Stand Width                                 79.5 inches  (2021 mm)
Maximum Scanner + Stand Depth                                 34 inches     (864 mm)